920D Custom Les Paul® Twenty-One Tone Wiring Upgrade with Four Push / Pull Pots

  • $149.99

Les Paul® Long Shaft Pots Wiring Harness Upgrade

Don't let factory wiring choke out your tone. Our premium components, industry leading wiring, and top-tier craftsmanship will allow the true tone from your pickups to shine through. This is a must-have upgrade for your Les Paul®.

Revolutionize your Les Paul® with our wiring harness upgrade. It lets you split both humbuckers into single-coils and also lets you access series/parallel and out-of-phase options when both pickups are engaged. (Remember, a minimum of two pickups is required for either in/out of phase or series/parallel switching.) The mod offers 21 different tones—10 of them hum-cancelling. This wiring harness will give you and your guitar a library of tones to choose from.

Components

  • 4 - Bourns Push / Pull 500K Pots
  • 1 - .015µF Orange Drop Capacitor by Sprague Electric (Neck)
  • 1 - .022µF Orange Drop Capacitor by Sprague Electric (Bridge)
  • 1 - Pure Tone Output Jack
  • 920D Custom Signature Wiring by Gavitt Wire

Switch Positions

  • Bridge
  • Bridge / Neck
  • Neck

Please note: This kit is designed for Gibson Les Paul® guitars that use long shaft pots. The bushing is 3/4" long. Please measure to make certain this is the right length for your guitar. Our pots require a 3/8" hole (industry standard pot size). Most USA made guitars are drilled this way, however imported guitars often are not. Metric knobs should be modified (drilled out) before use with CTS standard spec pots.

920D Custom Signature Wiring

All 920D Custom products are highlighted with our signature orange wire. Gavitt Wire, a leading producer of premium guitar wire, has agreed to custom manufacture our signature cloth covered pushback wire, and we believe it is the perfect choice for hotrodding your guitar. The wire is built with an outer waxed cotton layer and an inner Celanese braid that provides impressive ruggedness while still maintaining a 22 gauge thickness. Limiting the amount of wire on each build compliments your choice of pickups by creating the perfect balance between capacitance and resistance.

Hand-Built In The U.S.A.

All 920D Custom creations are hand-built by experienced technicians at our shop in Greenbrier, Arkansas. We treat your new gear like it's going into one of our own guitars. Every millimeter of wire is cut precisely, every solder joint is perfectly smooth and symmetrical, and every bend is purposeful and direct. We hold everything to a tremendous level of quality because we know the smallest details matter and we take great pride in our work.

Get your guitar stadium ready.

Everything we build is designed to allow

you to shape your sound exactly the way you want it.

 

From a single component to a fully functioning Loaded

Pickguard, we help guitarists break past the limits imposed

by cheaply made stock equipment.

 

Unlock your potential with our superior wiring,

designs, and support.

Related Upgrades

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out