920D Custom Stratocaster® 7-Way Wiring Harness Upgrade, Neck On and Coil Split Mods

  • $139.99

Stratocaster® 7-Way Wiring Harness Upgrade - Neck On & Coil Split Mods

Our S7W 7-Way Wiring Harness is one of the most versatile wiring harnesses available for a Stratocaster®. You get your standard 5-Way Stratocaster® pickup selections, along with 2 mini toggles. One of the toggles is a "neck-on" switch. This allows you to add the neck pickup to any position of the 5-Way selector switch - giving you bridge / neck and bridge / middle / neck pickup combinations. The second toggle is a coil split that will split your neck and bridge humbuckers, giving you a more traditional Stratocaster® single coil sound. "With the right choice of pickups, this harness will turn your Strat® into a fire breathing dragon." - Jimmy Darr

Components

  • 3 - 920D Custom 450G Series 250K Pots by CTS
  • 1 - Genuine CRL USA 5-Way Switch
  • 1 - .022 Orange Drop Capacitor
  • 2 - Mini Toggles
  • 1 - Pure Tone Output Jack
  • 920D Custom Signature Wiring by Gavitt Wire

Switch Positions

  • Bridge
  • Bridge / Middle
  • Middle
  • Middle / Neck
  • Neck
  • Bridge / Neck
  • Bridge / Middle / Neck

920D Custom Signature Wiring

All 920D Custom products are highlighted with our signature orange wire. Gavitt Wire, a leading producer of premium guitar wire, has agreed to custom manufacture our signature cloth covered pushback wire, and we believe it is the perfect choice for hotrodding your guitar. The wire is built with an outer waxed cotton layer and an inner Celanese braid that provides impressive ruggedness while still maintaining a 22 gauge thickness. Limiting the amount of wire on each build compliments your choice of pickups by creating the perfect balance between capacitance and resistance.

920D Custom 450G Series Potentiometers

920D Custom potentiometers are used in this build. Our pots are manufactured by CTS to our exact specifications and are metered for accuracy before being used in any 920D Custom gear.

We specify a 10% audio taper, accompanied with a low rotational torque rating of 0.50-2.00 in.oz (compared to the industry standard 0.75-6.00 in.oz rating) to provide a buttery knob sweep.

We hold potentiometer tolerances to ±10%. The industry standard is ±20%. Tightening potentiometer tolerances will help you accurately shape your tone.

Pure Tone 1/4" Output Jack

We exclusively use Pure Tone output jacks in all builds. Why? Because they're unquestionably better than the old, industry standard. Period.

We've all heard the crackle of a weak connection caused by pressure grounds. This is due to the old style jack only having 1 squared-off point of contact trying to meet a rounded quarter inch plug. Pure Tone has completely changed that.

Pure Tone's multi-contact quarter inch output jack has 4 rounded contact points that hold the quarter inch plug firmly in place. With 4 times the contact points, all of the dreaded cracks, snaps, and pops are gone for good. Trust us, the second you plug into this jack, you'll never want to go back.

Orange Drop Capacitors

We've used Orange Drop Capacitors in our builds since day one. Orange Drop Polyester Film / Foil Capacitors are wound from the most reliable polyester film and aluminum foil available and are protected by a rugged conformal coating of orange epoxy.

All of that to say, these capacitors do a tremendous job of warming up your tone and taking away some of the bite of an overly bright sound. Like our potentiometers, these capacitors are held to a ±10% tolerance.

CRL 5-Way Switch

Our S7W is built using a genuine CRL 5-Way Switch - which are well known for their durability and noise-free reliability. CRL switches are rated to last a lifetime. Hands down, this is the switch you want in your guitar.

Hand-Built In The U.S.A.

All 920D Custom creations are hand-built by experienced technicians at our shop in Greenbrier, Arkansas. We treat your new gear like it's going into one of our own guitars. Every millimeter of wire is cut precisely, every solder joint is perfectly smooth and symmetrical, and every bend is purposeful and direct. We hold everything to a tremendous level of quality because we know the smallest details matter and we take great pride in our work.

Get your guitar stadium ready.

Everything we build is designed to allow

you to shape your sound exactly the way you want it.

 

From a single component to a fully functioning Loaded

Pickguard, we help guitarists break past the limits imposed

by cheaply made stock equipment.

 

Unlock your potential with our superior wiring,

designs, and support.

Related Upgrades

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out

Pre-Wired and Ready to Rock 🤘

Loaded Pickguards

Why stop just shy of perfection? Upgrade your axe with a Loaded Pickguard and get everything you need for your dream tone, in one go.

Even if this will be your first install, we're confident you'll be up and running in no time. If you end up having any questions or need any help, our customer support team is well-versed in the process of installing in every guitar you can name and is always more than happy to guide you throughout the process.

If you already have a little experience soldering, you'll have your new pickguard installed and be blessing your ears in as little as 10 minutes.

But wait - there's more!

Follow the links below, to view our demo and instructional videos and to grab yours today.